◎ Title : Effects of variable valve timing and duration on catalyst heating using optically accessible MPI engine
◎ Authors : Jisoo Kim, Yubeen Yang, Namho Kim, Chulho Yu, Junkyu Park, Sungwook Park
◎ Source : Energy Conversion and Management / Vol. 322, DOI : 10.1016/j.enconman.2024.119157
◎ Article Number : 119157
◎ Published : DEC 15 2024
◎ Indexed : 2024-10-24
◎ Keywords : Optically accessible engine; PIV measurements; Valve timing; Valve durationIn-cylinder flow; Flame propagation
◎ Abstract :
The effects of intake and exhaust valve timing and duration were investigated using an optically accessible multi- point injection engine under catalytic heating conditions. The target engine features a quartz cylinder and an extended piston with a quartz piston crown. To understand the effects of valve timing and duration on the incylinder flow, particle image velocimetry (PIV) was applied to visualize the in-cylinder flow. The acquired images were used to quantitatively evaluate the in-cylinder flow characteristics, and the effects of these flow characteristics on the flame propagation were analyzed through flame visualization experiments. The results indicate that when the intake valve timing was advanced by 20 degrees, degrees , the average flow velocity was 59.5% higher, the tumble ratio was 72.2% greater, and the flame propagation velocity was also the fastest. The longest duration of 218 degrees degrees was advantageous for the intake valve duration, and the formation of a tumble flow pattern was important for fuel and air mixing. Finally, in the exhaust valve timing and duration experiment, the exhaust valve closing timing affected the amount of residual gas inside the cylinder. Therefore, the ratio of diffusion flames increased when the exhaust valve timing was advanced or retarded compared to the reference exhaust valve timing.
◎ Title : Effects of variable valve timing and duration on catalyst heating using optically accessible MPI engine
◎ Authors : Jisoo Kim, Yubeen Yang, Namho Kim, Chulho Yu, Junkyu Park, Sungwook Park
◎ Source : Energy Conversion and Management / Vol. 322, DOI : 10.1016/j.enconman.2024.119157
◎ Article Number : 119157
◎ Published : DEC 15 2024
◎ Indexed : 2024-10-24
◎ Keywords : Optically accessible engine; PIV measurements; Valve timing; Valve durationIn-cylinder flow; Flame propagation
◎ Abstract :
The effects of intake and exhaust valve timing and duration were investigated using an optically accessible multi- point injection engine under catalytic heating conditions. The target engine features a quartz cylinder and an extended piston with a quartz piston crown. To understand the effects of valve timing and duration on the incylinder flow, particle image velocimetry (PIV) was applied to visualize the in-cylinder flow. The acquired images were used to quantitatively evaluate the in-cylinder flow characteristics, and the effects of these flow characteristics on the flame propagation were analyzed through flame visualization experiments. The results indicate that when the intake valve timing was advanced by 20 degrees, degrees , the average flow velocity was 59.5% higher, the tumble ratio was 72.2% greater, and the flame propagation velocity was also the fastest. The longest duration of 218 degrees degrees was advantageous for the intake valve duration, and the formation of a tumble flow pattern was important for fuel and air mixing. Finally, in the exhaust valve timing and duration experiment, the exhaust valve closing timing affected the amount of residual gas inside the cylinder. Therefore, the ratio of diffusion flames increased when the exhaust valve timing was advanced or retarded compared to the reference exhaust valve timing.